Daiwa 22 Exist LT Spinning Reels really are the Reel for the future. Created to lead the way, the centre of attention amongst DAIWA. To create and change the future of the fishing scene the new AIRDRIVE DESIGN was created to be the pinnacle, the one which all will follow. By reducing the weight of rotor, spool & bail assembly, a lighter rotation is achieved with the effortless rotation allows the angler to feel the true joy of trouble free function.
This new chapter starts with DAIWA 22 EXIST.
To begin the creation of AIRDRIVE DESIGN, first DAIWA separated the spinning reel to two key components. The first was the ‘rear unit’ which consists of the body & key internal components like the drive gear. By introducing MQ technology along with the tough digigear which is now becoming standard of DAIWA’s spinning reel, it has given the rear unit high strength and durability.
Following the development of the rear unit, DAIWA set out to redevelop the key components that make up what is called the ‘front unit’. By redeveloping the rotor, spool & bail assembly DAIWA has managed to reduce the weight of front unit in 2022. Years in the making, AIRDRIVE DESIGN is the result of this new thinking. DAIWA has developed an innovative masterpiece allowing anglers to be in total control, reduced weight, smooth rotation and high response allows the reel to spin freely. All of those combined elements come together to create AIRDRIVE DESIGN.
The New AIRDRIVE DESIGN can be broken into 4 key technologies.
Unlike the traditional internal reel structure, DAIWA has developed a low contact structure between the mainshaft and pinion gear called AIRDRIVE SHAFT. By adopting this method, friction is reduced and smoothness has improved, by combining these new technologies together allows the reel to be extremely lightweight and allows the angler to experience the low-inertia flowing rotation with greater control of the line and rod action.
- AIRDRIVE DESIGN
- AIRDRIVE ROTOR
- AIRDRIVE BAIL
- AIRDRIVE SPOOL
- AIRDRIVE SHAFT
- TWISTBUSTER 3
- MQ Body (Mg)
- Tough Digigear
- MAGSEALED. Body, Line roller, Drive Gear
- ATD Type-L
- 12BB (2MS, 10CRBB)
- Made in Japan
|
MODEL |
RATIO/CRANK |
B/BEARINGS |
LINE CAPACITY |
WEIGHT |
DRAG |
HANDLE |
|
22 EXIST LT 2000D-P G |
4,9/64cm |
12(2MS,10CRBB) |
0.10mm/300m |
155g |
5kg |
I Light |
|
22 EXIST LT 2500-XH G |
6,2/87cm |
12(2MS,10CRBB) |
0.10mm/200m |
165g |
5kg |
I Light |
|
22 EXIST PC LT 2500D G |
5,2/73cm |
12(2MS,10CRBB) |
0.16mm/300m |
175g |
10kg |
T Light |
|
22 EXIST LT 3000D G |
5,2/77cm |
12(2MS,10CRBB) |
0.18mm/300m |
180g |
10kg |
T Light |
|
22 EXIST LT 4000D G |
5,2/82cm |
12(2MS,10CRBB) |
0.20mm/300m |
205g |
10kg |
T Large |
|
22 EXIST LT 4000-XH G |
6,2/99cm |
12(2MS,10CRBB) |
0.18mm/300m |
205g |
10kg |
T Light |
We currently only have the 22 EXIST LT 3000DG in stock but more will follow when available from Daiwa!!!
These are NOT Japanese JDM Imports, they are direct from Dawia UK...New for 2022/23...In Stock Now!!!
Daiwa 22 Exist LT Spinning Reels
Daiwa 22 Exist LT Spinning Reels really are the Reel for the future. Created to lead the way, the centre of attention amongst DAIWA. To create and change the future of the fishing scene the new AIRDRIVE DESIGN was created to be the pinnacle, the one which all will follow. By reducing the weight of rotor, spool & bail assembly, a lighter rotation is achieved with the effortless rotation allows the angler to feel the true joy of trouble free function.
This new chapter starts with DAIWA 22 EXIST.
To begin the creation of AIRDRIVE DESIGN, first DAIWA separated the spinning reel to two key components. The first was the ‘rear unit’ which consists of the body & key internal components like the drive gear. By introducing MQ technology along with the tough digigear which is now becoming standard of DAIWA’s spinning reel, it has given the rear unit high strength and durability.
Following the development of the rear unit, DAIWA set out to redevelop the key components that make up what is called the ‘front unit’. By redeveloping the rotor, spool & bail assembly DAIWA has managed to reduce the weight of front unit in 2022. Years in the making, AIRDRIVE DESIGN is the result of this new thinking. DAIWA has developed an innovative masterpiece allowing anglers to be in total control, reduced weight, smooth rotation and high response allows the reel to spin freely. All of those combined elements come together to create AIRDRIVE DESIGN.
The New AIRDRIVE DESIGN can be broken into 4 key technologies.
Unlike the traditional internal reel structure, DAIWA has developed a low contact structure between the mainshaft and pinion gear called AIRDRIVE SHAFT. By adopting this method, friction is reduced and smoothness has improved, by combining these new technologies together allows the reel to be extremely lightweight and allows the angler to experience the low-inertia flowing rotation with greater control of the line and rod action.
- AIRDRIVE DESIGN
- AIRDRIVE ROTOR
- AIRDRIVE BAIL
- AIRDRIVE SPOOL
- AIRDRIVE SHAFT
- TWISTBUSTER 3
- MQ Body (Mg)
- Tough Digigear
- MAGSEALED. Body, Line roller, Drive Gear
- ATD Type-L
- 12BB (2MS, 10CRBB)
- Made in Japan
|
MODEL |
RATIO/CRANK |
B/BEARINGS |
LINE CAPACITY |
WEIGHT |
DRAG |
HANDLE |
|
22 EXIST LT 2000D-P G |
4,9/64cm |
12(2MS,10CRBB) |
0.10mm/300m |
155g |
5kg |
I Light |
|
22 EXIST LT 2500-XH G |
6,2/87cm |
12(2MS,10CRBB) |
0.10mm/200m |
165g |
5kg |
I Light |
|
22 EXIST PC LT 2500D G |
5,2/73cm |
12(2MS,10CRBB) |
0.16mm/300m |
175g |
10kg |
T Light |
|
22 EXIST LT 3000D G |
5,2/77cm |
12(2MS,10CRBB) |
0.18mm/300m |
180g |
10kg |
T Light |
|
22 EXIST LT 4000D G |
5,2/82cm |
12(2MS,10CRBB) |
0.20mm/300m |
205g |
10kg |
T Large |
|
22 EXIST LT 4000-XH G |
6,2/99cm |
12(2MS,10CRBB) |
0.18mm/300m |
205g |
10kg |
T Light |
We currently only have the 22 EXIST LT 3000DG in stock but more will follow when available from Daiwa!!!
These are NOT Japanese JDM Imports, they are direct from Dawia UK...New for 2022/23...In Stock Now!!!
